SUGAR WORK AND STYROFOAM CARVING

SUGAR WORK : HOW TO WORK WITH SUGAR

• Use the right sized pot. 
==> Whatever the amount of syrup you're making, you want the initial sugar and water mixture to come about halfway up the sides of the pot. If it's too small, cooking sugar takes forever and you risk it boiling over. Use too large a pot and the sugar will cook so quickly that you're likely to overcook it.

• Medium to high heat is ideal for boiling sugar. 
==>Again, too low and it takes forever; too high and it cooks too quickly.

• Combine your sugar and water off the heat, and stir it just until the sugar is evenly moistened.

• Avoid stirring the sugar if at all possible once you put it on the stove. Agitation can cause the sugar to crystallize.

• If you have to stir it, use a clean stainless steel spoon. 
==> If you use the same spoon, the temperature difference between the residual sugar on the spoon and the boiling sugar can cause it to crystallize. Also, spoons made from other materials like wood or plastic could have foreign particles or residual fats on their surface that could (you guessed it) cause the sugar to crystallize.

• Use a pastry brush dipped in water to wipe down the sides of the pot during the first few minutes of cooking.
==> If the sugar mixture sloshed onto the sides of the pot, you'll want to wipe down the spatter. The best way to do this is by dipping a pastry brush in a little water and running it lightly around the interior of the pan just above the sugar-line. The water won't cause the sugar to crystallize.

• Use an interfering agent to prevent crystallization.
==> Interfering agents are usually acids like lemon juice, vinegar, or cream of tartar. These interrupt the binding process of the sugar crystals and help prevent crystallization. Just a teaspoon or two should do the trick.

• Watch the pot of boiling sugar like a hawk. 
==> Sugar can be slow to get going, but once it reaches a full boil, it can move swiftly through the stages. A candy thermometer helps you keep an eye on how fast the temperature is rising. Until we feel more comfortable recognizing the stages of sugar, we'll try to resist our usual multi-tasking tendencies and stay close to the stove!

STYROFOAM CARVE

HOW TO CARVE THE STYROFOAM

Instructions
1. Decide on a shape. Before you begin to carve a piece of Styrofoam, you need to have a good idea of what you want to create with it. You can draw out a template on cardboard or simply sketch something out on paper. This will help you develop a plan of attack when it comes time to do the actual carving.

2. Start with the bigger cuts. Once you have an idea of the shape you want, begin by cutting large chunks of Styrofoam off to get close to the end result. You can use a serrated knife for the large cuts; if the Styrofoam is really thick, try an electric knife or hot wire tools.

3. Do some detail work. Once you have the general shape cut out, you need to go in and do the detail work. This can be done with a smaller serrated knife and a little bit of patience. A craft knife is also a good choice for the detail work.

4. Create some texture. If you want to create some texture, there are many specialty tools designed to help you carve Styrofoam. Some can  help you create circles, while others can help you create texture or designs in your foam.

BUTTER SCULPTURE AND CHOCOLATE MAKING

BUTTER SCULPTURE

• Often depict animals, people, buildings and other objects.
• Found banquet tables and even small decorative butter pats.

Steps

You Will Need

• Butter
• A cool room
• Ice water
• Materials for the framework
• Sculpting tools
• Food coloring

1. Step 1

   Find a cool room

   Find a cool room in which to work so your butter doesn’t melt as you sculpt.
2. Tip
   Today, Tibetan monks create their works of art in rooms kept at 32° F.
3. Step 2

   Pick a subject

   Pick a subject. Let your mind run wild. Butter sculptors have created everything from The Last Supper to Elvis Presley.
4. Step 3

   Soak the butter

   Soak the butter in very cold water in order to remove impurities and give the butter an extra- smooth texture. The amount of butter you soak depends on how large you’d like your sculpture to be.
5. Step 4

   Build the frame

   Build a frame to hold your base in place. Traditionally, bamboo sticks were fashioned into the framework, but you can use wood and/or metal.
6. Step 5

   Dip hands in ice

   Before you start sculpting, dip your hands in ice water. Your hands must be kept practically numb, or your body heat will melt your creation.
7. Step 6

   Knead the butter

   Knead the butter into a paste that’s free of air bubbles.
8. Tip
   Add food coloring to the paste, or parts of the paste, if you like.
9. Step 7

   Butter the base

   Load the butter onto the base, and begin shaping it with your hands.
10. Step 8

    Fine-tune your design

    Fine-tune your design with tallow tools. Use modeling tools for smoothing and contouring large surfaces, and sculpting tools for intricate detail.
11. Tip
    Many household items, like shoe horns and manicure instruments, can be turned into sculpting tools, so use your imagination.
12. Step 9

    Keep it cool

    Once you’ve completed your masterpiece, store it somewhere it won’t melt before the big reveal.
    
    sources:http://www.howcast.com/videos/152427-How-to-Make-a-Butter-Sculpture 

Presentation Group 1 (Handbag)

CHOCOLATE MAKING

• Raw or processed food produced from the seed of the tropical Theobroma cacao tree.
• Cacao has been cultivated for at least three millennia in Mexico, Central and South America.
• The seeds of the cacao tree have an intense bitter taste, and must be fermented to develop the flavor.
• Cocoa solids contain alkaloids such as theobromine and phenethylamine, which have physiological effects on the body.
• Some research found that chocolate, eaten in moderation, can lower blood pressure.

 Cocoa powder method

1. Place the water in a pot and heat it. Keep it below boiling.
2. Combine cocoa powder and softened butter in a bowl. Mix until you have a smooth paste. Use a whisk, food processor, or even an immersion blender to eliminate lumps.
3. Add cocoa powder mix to the hot water and stir.
4. Allow temperature to rise back up. Again, it should be hot but not boiling.
5. Pour hot mixture into a bowl.
6. Sift flour and powdered sugar together in a separate bowl. Eliminate as many clumps as you can.
7. Stir sugar and flour mixture into hot cocoa mix.
8. Add milk and blend until smooth.
9. Pour the mixture in thin layers across the bottoms of various containers. Since the chocolate will take the shape of the container, a rectangular casserole dish will work well for a rectangular bar. You can also use candy molds.
10. Harden overnight in the refrigerator or freezer

                                                                               

DECORATION CAKE

Cake decorating has become popular because it combines a variety of different skills and interests.

•   Encompasses a great variety of skills and talents, including design, colour patterns, baking and sculpture.
•   One of the sugar arts that uses icing or frosting and other edible decorative elements to make otherwise plain cakes more visually interesting.
•   Cakes can be molded and sculpted to resemble three-dimensional persons, places and things.
•   Often a focal point of a special celebration. 

Make sure using the right utensils or equipment.

•   Many kinds of decorations.
•   Can take the shape of cartoon characters and superheroes, cars, houses, or others.
•   For writing and drawing, need to use piping bag or a syringe.
• 
  
  
  
  
  
  

ICE CARVING DEMO AND LEARNING

LEARNING 1 : FRUIT AND VEGETABLE CARVING

NUR AMALINA BINTI RAZALI
09DHK10F2115

NATRAH BINTI MOHD ARIFF
09DHK10F1015

FATIN NADIAH BINTI A AZIZ

RAHMAT HIDAYAT BIN MD.NASIR
09DHK10F2020

SITI NADIA FARHANA BINTI MOHAMAD SAZALI
09DHK10F2113




"Fruit carving" a culinary art master piece that always being a specialty in food service. It has been along time that fruit carving being one of the enhancement to the food display. Usually fruit carving is placed at the buffet counter as centerpiece. But now day fruit carving has play many role then just a food display before. It is now being carved to be a centerpiece for greeting, table display, and also being set as masterpiece display especially in wedding ceremony, launching, and even in birthday party. unlike before, fruit carved in many form but the most popular is flower motive.

Type of fruit used.
Basically fruit that being carved is Papaya, Water melon, honey Dew, Rock Melon,sun Melon, and few more. selection of this fruit are based on their color of out side and inside of the fruit, and most important is the fruit is easy to carved with fine blade. Beside the fruit mention above, some of vegetable also used. the fruit must be soft in texture, not to over riped. fruit may be carved directly with the skin on or without the skin depend on the motif. Each fruit has difference texture and color. It will give difference combination of color. some fruit may not been carved but added to enhance the display. Fruit like grapes, pineapple, berries and others small fruit will give diference impact to the display.

How to do it.
To get the skill, a person need to understand the concept of work, the fruit, and able to play and control the knife. but the most important is mastering the technique which can be learn and practice. beside that observation also is part of the skill. it may take months, even years to master it. some person even customize their tool and technique in order to get the most out of it. it include the knife, motif and display stand. In the past, people learn to carved from other person but now day lot of fruit carving book has been publish. With this an Culinary artist may understand and get the picture of what their carving. All in all learning carving the fruit need to be guide by master or advance carver.

Basic Set of Carving Knife
All the basic tool you need to start carving.